Smart Node Deployment Strategy

Best practices for physical placement of logic nodes on the grid base.

The Physics of Placement

Unlike standard nails, Smart Nodes have a physical footprint of 1.25" x 1.25". When mapping a 1:1 scale harness, engineers must account for this displacement at extreme branch points.

Common Mistakes:

Clustering at Terminals: Placing 10 nodes within a 4-inch radius for a D-Sub connector breakout will cause physical interference. Use a multi-pin breakout node instead of singular logic nodes.
Magnetic Polarity Conflicts: Node bases use N52 neodymium magnets. Ensure a minimum spacing of 0.5 inches between adjacent nodes to prevent shear-locking.

Rule of Thumb: For main trunk lines, deploy a support node every 18 inches to prevent sag and ensure the harness remains flat against the grid base.

For more on physical layout, see the Grid Assembly Guide.